HPE ProLiant DL380 Gen10 Network Choice – rack-mountable – Xeon Silver 4214

Cache Memory
Type :L3 cache
Installed Size :16.5 megabyte

RAM
Form Factor :DIMM 288-pin
Technology :DDR4 SDRAM
Installed Size :32 GB
Max Supported Size :1.5 TB
Configuration Features :1 x 32 GB
Data Integrity Check :Advanced ECC
Slots Qty :24
Empty Slots :23
Memory Speed :2400 megahertz
Rated Memory Speed :2933 megahertz
Features :Dual rank, HPE SmartMemory, Registered, Slots 13 – 24 are available in two-processor configuration only

Type :RAID
Bus Type :PCI Express 3.0 x8
Interface Type :Serial ATA-600 / SAS 3.0
Storage Controller Name :HPE Smart Array P408i-a SR Gen10
Channel Qty :8
Installed Qty :1
Buffer Size :2 GB
RAID Level :RAID 0, RAID 1, RAID 1 ADM, RAID 10, RAID 10 ADM, RAID 5, RAID 50, RAID 6, RAID 60

Networking
Ethernet Controller(s) :HPE 366FLR
Remote Management Controller :Integrated Lights-Out 5
Data Link Protocol :Ethernet, Fast Ethernet, Gigabit Ethernet
Ethernet Ports :4 x Gigabit Ethernet

Expansion Bays
Bays :8 (total) / 8 (free) x hot-swap 2.5″ SFF
Expansion Slots
Slots :1 (total) / 0 (free) x FlexibleLOM, 1 (total) / 1 (free) x microSD Card (internal), 1 (total) / 1 (free) x PCIe 3.0 x16 – full-length, full-height, 1 (total) / 1 (free) x PCIe 3.0 x8 – full-length, full-height, 1 (total) / 1 (free) x PCIe 3.0 x8 – half-length, full-height

Interface Provided
Interfaces :1 x HPE iLO, 1 x HPE iLO (service port), 1 x VGA, 3 x USB 3.0 (1 front, 2 rear), 4 x LAN (Gigabit Ethernet)

Power Device
Type :Power supply – hot-plug
Power Redundancy :Optional
Power Redundancy Scheme :1+1 (with optional power supply)
Installed Qty :1
Max Supported Qty :2
Power Provided :800 watt
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz
80 PLUS Certification :80 PLUS Platinum

Service & Support Details
Service & Support :Limited warranty – parts and labor – 3 years – on-site