HPE ProLiant DL560 Gen10 – rack-mountable – Xeon Gold 5220 2.2 GHz – 64 GB

Cache Memory
Type :L3 cache
Per Processor Size :24.75 megabyte, 24.75 megabyte
Installed Size :49.5 megabyte

RAM
Form Factor :DIMM 288-pin
Technology :DDR4 SDRAM
Installed Size :64 GB
Max Supported Size :768 GB
Slots Qty :48
Features :6-channel memory architecture, Dual rank, Registered, Slots 25 – 48 are available in four-processor configuration only

Type :RAID
Interface Type :Serial ATA-600 / SAS 3.0
Storage Controller Name :HPE Smart Array P408i-a
Channel Qty :8
Installed Qty :1
Buffer Size :2 GB, 2 GB
RAID Level :RAID 0, RAID 1, RAID 1 ADM, RAID 10, RAID 10 ADM, RAID 5, RAID 50, RAID 6, RAID 60

Networking
Remote Management Controller :Integrated Lights-Out 5
Data Link Protocol :Ethernet, Fast Ethernet, Gigabit Ethernet
Ethernet Ports :4 x Gigabit Ethernet
Features :PXE support, Wake on LAN (WoL)

Expansion Bays
Bays :1 (total) / 1 (free) x external, 8 (total) / 8 (free) x hot-swap 2.5″ SFF

Expansion Slots
Slots :1 (total) / 0 (free) x FlexibleLOM, 1 (total) / 1 (free) x microSD Card (internal), 2 (total) / 2 (free) x PCIe 3.0 x16 – three-quarter-length, full-height, 4 (total) / 4 (free) x PCIe 3.0 x8 – three-quarter-length, full-height

Interface Provided
Interfaces :1 x HP iLO – RJ-45, 1 x HP iLO – Type A (1 in front), 1 x HPE iLO – RJ-45, 1 x HPE iLO – Type A (1 in front), 1 x serial (1 rear), 1 x VGA (1 rear), 2 x USB 2.0 (2 rear), 4 x LAN (Gigabit Ethernet), 5 x USB 3.0 (1 front, 2 rear, 2 internal)

Power Device
Type :Power supply – hot-plug
Power Redundancy :Yes
Installed Qty :1
Max Supported Qty :4
Power Provided :1600 watt
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz
Efficiency :94%
80 PLUS Certification :80 PLUS Platinum

Service & Support Details
Service & Support :Limited warranty – parts and labor – 3 years – on-site