HPE ProLiant ML350 Gen10 Base – tower – Xeon Silver 4210R 2.4 GHz – 16 GB

Cache Memory
Type :L3 cache
Per Processor Size :13.75 megabyte, 13.75 megabyte
Installed Size :13.75 megabyte

RAM
Form Factor :DIMM 288-pin
Technology :DDR4 SDRAM
Installed Size :16 GB
Max Supported Size :1.5 TB
Configuration Features :1 x 16 GB
Data Integrity Check :Advanced ECC
Slots Qty :24
Empty Slots :23
Memory Speed :2400 megahertz
Rated Memory Speed :2933 megahertz
Features :HP SmartMemory, HPE SmartMemory, Registered, Slots 13 – 24 are available in two-processor configuration only

Type :RAID
Bus Type :PCI Express 3.0 x8
Interface Type :Serial ATA-600 / SAS 3.0
Storage Controller Name :HPE Smart Array P408i-a SR Gen10
Channel Qty :8
Installed Qty :1
Buffer Size :2 GB, 2 GB
RAID Level :RAID 0, RAID 1, RAID 1 ADM, RAID 10, RAID 10 ADM, RAID 5, RAID 50, RAID 6, RAID 60

Networking
Ethernet Controller(s) :HP 369i
Remote Management Controller :Integrated Lights-Out 5
Data Link Protocol :Ethernet, Fast Ethernet, Gigabit Ethernet
Ethernet Ports :4 x Gigabit Ethernet
Remote Management Protocol :IPMI 2.0, SNMP 3
Features :PXE support, Wake on LAN (WoL)

Expansion Bays
Bays :8 (total) / 8 (free) x hot-swap 2.5″ SFF

Expansion Slots
Slots :1 (total) / 1 (free) x microSD Card (internal), 2 (total) / 2 (free) x PCIe 3.0 x16 – full-length, full-height, 2 (total) / 2 (free) x PCIe 3.0 x8 – full-length, full-height (x4 mode)

Interface Provided
Interfaces :1 x HP iLO, 1 x HP iLO (1 in front) (service port), 1 x serial, 1 x USB 2.0 (1 internal), 1 x VGA, 4 x LAN (Gigabit Ethernet), 5 x USB 3.0 (2 front, 2 rear, 1 internal)

Power Device
Type :Power supply – hot-plug
Power Redundancy :Optional
Power Redundancy Scheme :1+1 (with optional power supply)
Installed Qty :1
Max Supported Qty :2
Power Provided :800 watt
Nominal Voltage :AC 120/230 V
Frequency Required :50/60 hertz

Service & Support Details
Service & Support :Limited warranty – parts and labor – 3 years – on-site